Table of Contents
Advertisement
INSTALLATION
ELECTRICAL CONNECTION - STEP 8
1. Put the grommets into the socket.
2. Plug in first connected plug from where it was removed.
3. Plug in second connected plug from where it was removed.
4. Plug in third connected plug from where it was removed.
2. 2.
3. 3.
1. 1.
Fig. 18 Electrical connection - step 8
FITTING THE COVER
Fig. 19 Fitting the cover
8
4. 4.
6 720 804 106-16.1O
6 720 804 106-17.1O
3.2.3 WIRING DIAGRAMS WITH SYSTEM EXAMPLES
The circuit diagrams are only schematic illustrations and provide a non-
binding indication of possible installations. Install safety equipment in
accordance with applicable standards and local regulations. For further
information refer to the installation instructions of the boiler and control
accessory selected or for the the additional system components (not
supplied by Worcester, Bosch Group) those supplied by the
manufacturer.
Worcester, Bosch Group technical support may be contacted on the
telephone number on the back of these instructions.
6 720 804 107 (2012/10)
Advertisement
Table of Contents
