Error Messages - Pro-Line System CS300FU Operating Instructions Manual

E. Error messages
MOD Description
MOD S Error message
MOD 17 SEP adivated
F.
Functions for external accessories
MOD Description
MOD 13 Magnetic lock fundion
MOD 20 Activation of optoeledronic transmission system
MOD 21 Test of draw-in protedion
MOD 22 Test of external safety devices
MOD 24 Capacitor
MOD 2S Yard light fundion
MOD 26 Adivation of radio transmission system
MOD 28 Relay OFF
Re marks
The relay closes the contad when a stop com mand is given or an error occurs.
All errors described in sedi on 1 O result in adivation of the relay.
The relay opens the contad when the switching strip is adivated. An error in the
switching strip or an unsuccessful test is shown via MOD S.
Rema rks
The relay is open in the CLOSED end position. il an OPEN com mand is received, the
relay closes and remains closed until the CLOSED end position is reached again. il
a time delay is required for opening the magnetic lock, this is realised through the
parameter DELAY OPEN and forewarning .
Before every CLOSE com mand, the optoeledronic transmission system is adivated
and remains adive for the duration of the closing run.
This adivation results ina closing run delay of approx. O. S seconds.
The relay generates a test signal when the CLOSED end position is reached and
expects, as a readion to the test signal, that the safety circuit is adivated.
The relay generates a test signal when the OPEN end position is reached and
expeds, asa readion to the test signal, that the switching strip input circuit is
adivated.
At every drive com mand the relay closes for approx. 1 second. With the aid of this
relay, an additional starting capacitor that is required for AC applications is switched
on in addition,
to
ensure safe starting of the motor.
At every OPEN com mand, the relay is closed for 2 minutes and can the relo re be used
to control a light.
Before every CLOSE com mand the radio transmission system is adivated by an
impulse. The duration of the adivation must be set in the transmission system.
This adivation results in a closing run delay of approx. O.S seconds.
The relay is always open.