Automatic Operating Mode - Pro-Line System CS300FU Operating Instructions Manual

9.1 Automatic operating mode
Display
AUTO MATIC
OPENING
AUTO MATIC
CLOSING
AUTO MATIC
RESTING
AUTO MATIC
RESTING
AUTO MATIC
RESTING
AUTO MATIC
RESTING
AUTO MATIC
RESTING
AUTO MATIC
RESTING
o
o
u
Information:
Description
The door is driven to the OPEN* end position*
The door is driven to the CLOSED* end position
The door stands between the end positions
The door stands at the OPEN end position
The door stands at the position PART OPEN ("before-end position" up)
The door stands at the CLOSED end position
The door stands at the position PART CLOSE (..before-end position" dawn)
The door stands in the position where the reversing switches off
ff the "self /ocking" parameter is set to MOD2 or MOD3 in the input menu, the display changes from AUTOMATIC to
MANUAL OPERATION.
Display
MANUAL
MANUAL UP
MANUAL
MANUAL DOWN
MANUAL
RESTING
Description
The door is driven to the OPEN* end position*
The door is driven to the CLOSED* end position
The door stands between the end positions
*When the gate is being driven OPEN, the power currently being used is displayed.