Table of Contents
Advertisement
Electrical Connection (4-wire)
4
Feed supply cord up through hole in bottom
of range back.
6
Attach line #1 (red) and line #2 (black)
leads to outside terminal. Attach neutral wire (white) to
center terminal on terminal block.
8
Reattach access door.
18
All manuals and user guides at all-guides.com
(cont.)
5
Attach ground lead (green)
with ground screw that was removed.
7
1 1
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
Leveling/Adjustments/Alignment
1
Measure the four corners in cutout area to verify if
flooring is level.
3
Move unit into opening.
5
If leveling is required, move unit out of opening.
19
2
For uneven or sloped floors, level unit with metal shims
only, as the adjustment required may exceed
the thread available in the leg.
4
"
"
"
3 / 8
3 / 8
3 / 8
)
)
)
c m
c m
c m
9 5
9 5
9 5
( 0 .
( 0 .
( 0 .
Check that unit is level side to
side and front to back. Side trim of the high corner
must be 3/8" (0.95 cm) above countertop.
6
1
1
Lift unit and prop on wood blocks.
Advertisement
Table of Contents
