Setting Time And Date - Topcom HBM Sensor Watch 2002 User Manual

8

7.1 SETTING TIME AND DATE

In time Current Time mode :
• Press and hold MODE until the seconds are blinking on the display.
• Press ST./STP. to set the seconds to zero.
• Press MODE to switch to minutes.
• Press ST./STP. to increase the minutes or RESET to decrease the minutes.
• Press MODE to switch to hours
• Follow the same instruction as for the minutes to adjust the hour, year, month and day.
After setting the date
• Press ST./STP. to select the visualisation of the date ('month/day' or 'day/month').
• Press MODE to switch hour setting.
• Press ST./STP. to select 24Hours system or 12Hours systems (indication AM/PM)
• Press MODE to switch to the keybeep setting.
• Press ST./STP. to set the keybeep on (ON) or off (OF)
• If the date and time is correct, press and hold MODE to fix the setting.
TOPCOM HBM Sensor Watch 2002