Rock Augers (Option) - Land Pride PD15 Operator's Manual

Section 4: Options and Accessories

Rock Augers (Option)

Refer to Figure 4-5:
Rock Augers
Part No. Part Description
317-258A PD 6" Rock Auger Assembly
317-259A PD 9" Rock Auger Assembly
317-260A PD 12" Rock Auger Assembly
317-261A PD 15" Rock Auger Assembly
317-262A PD 18" Rock Auger Assembly
Bolt-on Rock Heads (Accessory)
Refer to Figure 4-6:
NOTE: Do not use this accessory with the PD10 Dirt
Augers or the optional Rock Augers.
The PD15, PD25, and PD35 Dirt Augers can be
converted to Rock Augers with this accessory. Remove
existing dirt auger teeth and point. Attach rock head (#1)
to the auger with 1/2"-13 GR5 bolt (#2) and locknut (#3).
Clamp rock head to the auger's spiral flighting with wear
caps (#4 & #5), 1/2"-13 GR5 bolts (#6), and lock
nuts (#3). Tighten lock nuts (#3) to the correct torque.
Bolt-on Rock Heads (PD15, PD25, & PD35)
Part No. Part Description
317-274A SA 6" Bolt-on Rock Head Assembly
317-275A SA 9" Bolt-on Rock Head Assembly
317-276A SA 12" Bolt-on Rock Head Assembly
317-277A SA 15" Bolt-on Rock Head Assembly
317-278A SA 18" Bolt-on Rock Head Assembly
Rock Auger Teeth
Refer to Figure 4-7:
Rock Auger Teeth
Part No. Part Description
820-695C Belltec Auger Tooth (For Rock Augers)
820-713C Pengo Rock Auger Tooth (Bolt-on Rock Heads)
Torque Limiter Driveline (Option)
Refer to Figure 4-8:
Land Pride recommends the optional Cat. III driveline
with a radial clutch torque limiter for the PD25 & PD35
Post Hole Diggers with 15" and larger auger sizes.
Torque Limiter Driveline
Part No. Part Description
826-879C Driveline C3 38 1.38-6 QD Torque Limiter
8/9/19
Table of Contents
70138
70132
Bolt-on Rock Heads (12"Assembly Shown)
Bolt-on Rock Head Tooth
26981
PD25 & PD35 Radial Pin Torque Limiter Driveline Option
PD10, PD15, PD25 & PD35 Post Hole Diggers 317-048M
PD/HD Rock Augers
Figure 4-5
6 4
1
3
3
For PD15, PD25, & PD35 only)
Figure 4-6
820-713C
Rock Auger Tooth
Rock Auger Teeth
Figure 4-7
Figure 4-8
5
2
820-695C
27