Download Print this page

Axis A9161 Installation Manual page 4

Network i/o relay module

Advertisement

English
Safety information
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide for
future reference.
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided, could result in
damage to property.
Other message levels
Important
Indicates significant information which is essential for the
product to function correctly.
Note
Indicates useful information which helps in getting the
most out of the product.
Safety instructions
WARNING
The Axis product shall be installed by a trained professional,
and in compliance with local laws and regulations.
NO
NO TICE
NO
TICE
TICE
The Axis product shall be used in compliance with local
laws and regulations.
The product shall be grounded either through a shielded
network cable (STP) or other appropriate method.
To use the Axis product outdoors, or in similar
environments, it shall be installed in an approved
outdoor housing.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or heavy
pressure.
Do not install the product on unstable poles, brackets,
surfaces or walls.
Use only applicable tools when installing the Axis
product. Using excessive force with power tools could
cause damage to the product.
Do not use chemicals, caustic agents, or aerosol cleaners.
Use only accessories that comply with the technical
specification of the product. These can be provided by
Axis or a third party.
Use only spare parts provided by or recommended by
Axis.
Do not attempt to repair the product yourself. Contact
Axis support or your Axis reseller for service matters.
The power supply shall be plugged in to a socket outlet
installed near the product and shall be easily accessible.
WARNING
Maximum connected load on the relay is 30 V DC, 1 A.
CAUTION
Disconnect power before connecting any wires to the Axis
product. Never make connections while power is applied to
the product.
NO TICE
NO
NO
TICE
TICE
The product shall be connected using a shielded
network cable (STP). All cables connecting the product
to the network shall be intended for their specific
use. Make sure that the network devices are installed
in accordance with the manufacturer's instructions.
For information about regulatory requirements, see
Regulatory information on page 2 .
If using Power over Ethernet, wait with connecting the
network cable to the network until all the other wires
have been connected.
To protect the circuits against electrostatic discharge
(ESD), use ESD protection when connecting wires to the
product.
Make sure all the wires are connected correctly.
Incorrect wiring could cause damage to the product.
Make sure to use wires that meet the requirements.
Each wire shall have an conductor cross-sectional
area that corresponds to an conductor gauge range of
AWG 28–16 (CSA) or AWG 22–14 (cUL/UL). Select cables
in compliance with your local regulations.
The recommended maximum cable length is 30 m (100
ft).
Use a Class 1 electrical energy source (ES1) or a Safety
Extra Low Voltage (SELV) compliant limited power
source (LPS) with either a rated output power limited to
≤100 W or a rated output current limited to ≤5 A at
≤100 W.
Transportation
NO TICE
TICE
NO
NO
TICE
When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the
product.
Battery
The Axis product uses a 3.0 V BR1220 lithium battery as the
power supply for its internal real-time clock (RTC). Under
normal conditions this battery will last for a minimum of
five years.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS no. 110-71-4.
Français
Informations sur la sécurité
Lisez attentivement ce guide d'installation avant d'installer
l'appareil. Conservez le guide d'installation pour toute
référence ultérieure.
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures graves.

Advertisement

loading