Wiring - Honeywell Micro-Pro UDC1200 Startup Manual

2. WIRING

Rear Terminal Wiring
USE COPPER CONDUCTORS
(EXCEPT FOR T/C INPUT)
Single Strand wire gauge:
Max 1.2mm (18SWG)
UDC 1200
UDC 1200 Start-up Guide
CAUTION: Check information label on
housing for correct operating voltage before
connecting supply to Power Input
Fuse: 100 – 240V ac – 1amp anti-surge
24/48V ac/dc – 315mA anti-surge
3
Rev 2