Weslo Pursuit 655s User Manual page 13

HOW TO ADJUST THE BELT
The exercise cycle features a precision belt that must
be kept properly adjusted. If the belt causes exces-
sive noise or slips as you pedal, the belt should be
checked. To do
this, the left
side shield must
first be
removed. Refer
to the instruc-
tions on page
12 and remove
the left side
shield. Next,
use an
adjustable
wrench to turn the right pedal counterclockwise and
remove it. Remove the right side shield. Press down
on the centre of the Belt (16) between the front and
rear pulleys. There should be from 1/4" to 1" of
vertical movement in the centre of the Belt.
All manuals and user guides at all-guides.com
16
13
If the Belt (16) is properly adjusted, reattach the side
shields and pedals. If the Belt needs to be adjusted,
loosen the M8 Washer Nut (37) on each side of the
Flywheel
Assembly (32).
To tighten the
Belt, turn the two
M6 Nuts (47)
clockwise; to
loosen the Belt,
turn the Nuts
counterclock-
wise. Make sure
that the Flywheel
is straight and
tighten the M8
Washer Nuts (37). Reattach the side shields and
pedals.
16
32
47
37