Dometic CFX Series Operating Manual page 14

Operation
➤ Re-fit the centre hinge in the new position.
➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 4).
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 2) three times.
➤ Use the "UP +" (fig. 3 10, page 2) or "DOWN –" (fig. 3 9, page 2) buttons to
select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few seconds.
The displays flash several times before returning to the current temperature.
Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
Defrost the cooler once a layer of ice forms.
Avoid unnecessarily low temperatures.
The cooler can be operated with 12 V
A
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
14
CFX75DZW, CFX95DZW
or 24 V .
g g