Advertisement
Quick Links
Operation Manual
Engine Hoist Support Beam
30154
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 30154
Summary of Contents for WilTec 30154
- Page 1 Operation Manual Engine Hoist Support Beam 30154 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 № Name № Name Support beam Bolt M10×35 Milled screw Hexagonal nut M10/M12 Washer 10 Trench support Handle sleeve Variable standing bracket Grip handle 12 Rubber sleeve © by WilTec Wildanger Technik GmbH Item 30154 Page 3 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
- Page 4 Weight (without chains) (㎏) 17 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 30154 Page 4 http://www.WilTec.de...