Kyocera TASKalfa 3050ci Service Manual page 229

Item No.
U247 Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U249 Finisher operation test
Description
Performs operating tests on the 4000-sheet finisher.
Purpose
To check the operation of the 4000-sheet finisher.
Method
1. Press the start key.
2. Select the item.
Punch Position
Booklet Pass
3. Press the start key.
4. Press the system menu key to make a test copy.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U250 Checking/clearing the maintenance cycle
Description
Changes preset values for maintenance cycle and automatic grayscale adjustment.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance and
automatic grayscale adjustment is periodically displayed.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +- keys or numeric keys.
Display
M.Cnt A
M.Cnt B
M.Cnt C
M.Cnt HT
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Check the stop position of punching
Check the paper paths to the center-folding unit
Preset values for maintenance cycle (kit A)
Preset values for maintenance cycle (kit B)
Preset values for maintenance cycle (kit C)
Preset values for automatic grayscale adjust-
ment
Description
Description
Description
1-3-135
2LK/2LN/2LM/2LC-2
Setting range
0 to 9999999
0 to 9999999
0 to 9999999
0 to 9999999