Table of Contents
Advertisement
7. Loosen the screws that secure the shield cover, then remove
the cover as shown below.
w
c
8. Push the clips on each side of the RAM slot outward.
22
Unpacking and Assembling the Printer
Warning:
Avoid touching the electrical components that are exposed
after you remove the shield cover. They may be very hot if the
printer has been in use.
Caution :
Before you install the module, be sure to discharge any static
electricity by touching the printer's shield cover or a
grounded piece of metal. Otherwise, you may damage static-
sensitive components.
screws
Advertisement
Table of Contents
