Troubleshooting; Cleaning And Care; Declaration Of Conformity (Doc); Technical Data - Renkforce Rubi Operating Instructions Manual

b) Pairing
• The product must be located in the immediate vicinity of the Bluetooth
• Switch on the Bluetooth device and activate the Bluetooth
®
mode. Please refer to the operating instructions of the Bluetooth
• Turn on the loudspeaker.
• Activate the search for the product on your Bluetooth
is finished, "LBT00738" is shown in the list of your Bluetooth
• Select "LBT00738" on your Bluetooth
• When the connection is established, a beep sounds and the blue LED flashes
more slowly.
• To interrupt the connection, press and hold the playback/pause button on the
remote control for approx. 3 seconds. A short beep sounds and the blue LED
begins flashing more quickly.
• Switch off the product and repeat the whole procedure if the pairing procedure was
not successful.
Only one single Bluetooth
active Bluetooth pairing with another Bluetooth
®
then this connection must first be interrupted.
The connection is interrupted if the product or the Bluetooth
which there is an active pairing, is switched off of or removed from range.
The connection is again automatically established when the Bluetooth
device is switched on again or put in the range of the product.
This function on the Bluetooth
the automatic set up connection (please refer to the instructions of your
Bluetooth device).
®
c) Audio playback
You can start/stop audio playback using the remote control. You can also switch to
the previous or next track.

Troubleshooting

Problem Solution
Check if the loudspeaker is on.
Check if a Bluetooth
made.
No sound
Check if the volume is turned all the way down.
Check if playback was interrupted.
Check if the light is connected to the power supply.
No light
Check the charge state of the remote control batteries.

Cleaning and care

• Turn off the product and let it cool down sufficiently before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other
chemical solutions since these can penetrate the housing or impair functionality.
• Do not apply too much pressure to the housing to prevent scratching.
• Clean the product with a dry, fibre-free cloth.
function or the pairing
®
device.
®
device. As soon as the scan
®
device.
®
device to establish a connection.
®
device can be paired with the product. If an
®
device already exists,
®
device might need to be activated to enable
®
connection has been successfully
®

Declaration of Conformity (DOC)

device.
® Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares
that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of
conformity: www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order
number in the search box. You can then download the EU declaration of
conformity in PDF format.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them
separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all
device, to
®
used (rechargeable) batteries. Disposing of them in the household waste
is prohibited.
®
Contaminated (rechargeable) batteries are labeled with this symbol to
indicate that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb =
Lead (name on (rechargeable) batteries, e.g. below the trash icon on the
left).
Used (rechargeable) batteries can be returned to collection points in your municipality,
our stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.

Technical data

a) Ceiling light
Operating voltage ................... 220 – 240 V/AC, 50/60 Hz
Power consumption ................ max. 32 W
Loudspeaker ........................... 6 W, 6 Ω, 130 Hz – 180 kHz, Ø 152.4 mm
Number of LEDs ..................... 128
Colour temperature ................. 3000 K (warm-white)
Luminous flux ......................... 1200 lm
Bluetooth range ..................... 8 m
®
Operating conditions ............... -10 to +40 °C, 10 - 90 % RH
Storage conditions .................. -20 to +70 °C, 10 - 90 % RH
Dimensions (Ø x H) ................ 400 x 75 mm
Weight .................................... 1285 g
b) Remote control
Power supply .......................... 2 x AAA batteries
Range ..................................... 8 m
Dimensions (L x W x H) .......... 110 x 50 x 25 mm
Weight .................................... 74 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1463766_V2_0217_02_IPL_m_en