Rollei DF-S 100 SE User Manual

Rollei DF-S 100 SE User Manual

Diafilm scanner
Hide thumbs Also See for DF-S 100 SE:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DF-S 100 SE and is the answer not in the manual?

Questions and answers

Summary of Contents for Rollei DF-S 100 SE

  • Page 2 Version 1.08...
  • Page 3: Table Of Contents

    Unpack Rollei DF-S100 SE Scanner........2 II. Install film into the film holder..........3 III. Quick Start................7 IV. Operation Guide..............12 V. Specification..............37 INFORMATION: The ROLLEI DFS 100 SE Film Scanner is conceived for private use only and not for the utilization of commercial purpose.
  • Page 4: Unpack Rollei Df-S100 Se Scanner

    Rollei DF-S100 SE Nega ve/Slide Film Holder Rollei DF-S190 SE User Manual USB power adapter USB/Video cable Clean brush Quick Guide Note We strongly suggest using a clean, dry, non- alcohol co on swab to clean the glass surface periodically to produce a clear image during opera on.
  • Page 5: Install Film Into The Film Holder

    II. Install film into the film holder Install the Slide into holder ● ● 1. Open the slide holder as illustrated 2. Put slide into positive slide slot 3. Close the film holder Install the Negative Film into holder ● 1.
  • Page 6 2. Install film into negative film slot 3. Close the film holder Install the Rapid Slide Feeder: ● 1. Take out the Rapid Slide Feeder from package 2. Put slides into slide slot, use 3. Insert the Slide Feeder into the unit Level bar to eject slide...
  • Page 7 Note  To avoid mirror image, follow the serial numbers (from left to right) on top of film when install negative film into holder Figure 1  If the image is upside down [see fig.2], the image can be corrected by Flip function in hard key of device before capture, or enter playback edit menu after capture [see fig.3 ].
  • Page 8: Figure

    <Up> then <Down> button to perform Flip Flip Press hard key on top of device in live view ● Figure 3...
  • Page 9: Quick Start

    III. Quick Start Power button Power status LED Right/+ button OK button Left/- button Film Slot SD card Slot USB port TV out jack...
  • Page 10 1. Put Film onto the film cartridge 2. Insert the film cartridge into Rollei DF-S100 SE...
  • Page 11 3. Connect USB cable to Rollei DF-S100 SE 4. Turn on Device by power button (Important: insert SD card before turning the device on)
  • Page 12 5. Press OK button to capture the image (Important: refer to Chapter 3 Film Type to set the correct film type before proceeding) 6. Follow the menu on display for scanning -10-...
  • Page 13 7. After finished the capture, take out the SD card which stored capture images 8. Or read picture from PC by MSDC mode -11-...
  • Page 14: Operation Guide

    IV. Operation Guide Home: Main menu Capture Playback Film Type USB mode Setting Capture: capture mode (default) ● Playback: playback mode ● Film Type: define the film type which loaded in cartridge ● USB mode: MSDC (Mass Storage Device Class) mode ●...
  • Page 15 1.1 Capture: <Up>/<Down> (Hard Key) <Up> Right/Up <OK> button <Down> Go Next Left/Down <Up> Press <Up> button to enter Mirror/Flip adjustment (see Chapter 1.2) ● <Down> Press <Down> button to enter Brightness/Color adjustment (see Chapter 1.3) ● -13-...
  • Page 16 1.2 Capture: <Up>/<Down> - Mirror/Flip (Hard Key) <Up> Right/Up <OK> button Go Back to <Down> 1.1 Capture Left/Down <Up> Press <Up> button to change image left to right ● <Down> Press <Down> button to upside down image ● -14-...
  • Page 17 1.3 Capture: <Up>/<Down> - Brightness/Color (Hard Key) <Up> Right/Up <OK> button Go back to <Down> 1.1 Capture Left/Down <Up> Press <Up> button to enter Brightness adjustment (See Chapter 1.4) ● <Down> Press <Down> button to enter Color adjustment (See Chapter 1.5) ●...
  • Page 18 1.4 Capture: <Up>/<Down> - Brightness (Hard Key) <Up> Right/Up <OK> button Go back to <Down> 1.1 Capture Left/Down <Up> Press <Up> button to increase Brightness with ranges of -3 to 3 ● <Down> Press <Down> button to decrease Brightness with ranges of -3 to 3 ●...
  • Page 19 1.5 Capture: <Up>/<Down> - Color Red (Hard Key) <Up> Right/Up <OK> button Go Next to <Down> Color Green Left/Down <Up> Press <Up> button to increase red color with ranges of -3 to 3 ● <Down> Press <Down> button to decrease red color with ranges of -3 to 3 ●...
  • Page 20 1.6 Capture: <Up>/<Down> - Color Green (Hard Key) <Up> Right/Up <OK> button Go Next to <Down> Color Blue Left/Down <Up> Press <Up> button to increase green color with ranges of -3 to 3 ● <Down> Press <Down> button to decrease green color with ranges of -3 to 3 ●...
  • Page 21 1.7 Capture: <Up>/<Down> - Color Blue (Hard Key) <Up> Right/Up <OK> button Go back to 1.1 Capture <Down> Left/Down <Up> Press <Up> button to increase blue color with ranges of -3 to 3 ● <Down> Press <Down> button to decrease blue color with ranges of -3 to 3 ●...
  • Page 22 1.8 Capture mode Live view indicator (flashing at 0.5sec rate) Once enter capture mode, there will be a red indicator on left top corner to indicate it is in live view mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive image according to previous defined Film Type (after power on.
  • Page 23 1.11 Capture: Save Save Once user press OK button on top of Rollei DF-S100 SE, preview (live view) image will be selected and shown on the TFT which will take between 3-4 second with 4 icons shown on the left side of the screen. Save icon will be highlighted for user to confirm the saving by OK button.
  • Page 24 1.13 Capture: Cancel Playback /captured image Or select Cancel and press OK button to cancel any of the editing step with present selected image and Rollei DF-S100 SE goes to live view mode (nothing will be saved onto the SD card). -22-...
  • Page 25 1.14 Capture: Home Go back to main menu, press OK button when select Home icon. 1.15 Exit from Edit mode back to Capture mode (Live View) Next image in film cartridge Once User presses OK button for save or cancel option, display will return to capture mode/live view.
  • Page 26 1.16 Memory full Once the internal memory or SD card is full, user can see a SD card full once press OK button. User has to down load the images to PC or replace another SD card for continue capture. 1.17 SD card locked SD card locked indicator...
  • Page 27 1.18 SD card error SD card error indicator If scanner cannot detect SD card in good condition, a warning icon with question mark will be shown on display. Please try to format the SD card or replace another proper SD card for continue further operation.
  • Page 28 2. Playback Playback Press Down button to Playback mode when power on Rollei DF-S100 SE or access the main menu by Home icon if during operation. Press OK button to confirm the selection. 2.1 Playback: Auto Slide Show Slide show mode Once user enter playback mode (default to slide show), 2.4 TFT will auto display all...
  • Page 29 2.2 Playback: Edit Menu Exit Delete Save Rotate +90 Rotate -90 Rotate +90: captured image rotate +90 degrees ● Rotate -90: captured image rotate -90 degrees ● Exit: returns to Slide show ● Delete: delete this picture stored in SD card ●...
  • Page 30 2.4 Slide Show -> Single picture -> Edit mode Slide show mode Single picture mode Edit mode Use Up/Down button to scroll picture to be modified 2.5 Playback: Rotate/Save If user wants to Rotate +90 degrees by OK button, the image will be rotate +90 degrees and cursor will remains at Save.
  • Page 31 2.6 Playback: Exit Once user select the EXIT function in edit menu, the display will go back to slide show starting with the current picture in internal memory or SD card without saving any change of present picture 2.7 Playback: Delete Delete will delete the present selected picture and next picture will be shown (N+1).
  • Page 32 2.8 Playback: Home Go back to main menu, press OK button when select Home icon 2.9 Playback: No Picture If there’s no picture inside internal memory or SD card when enter playback mode, a No picture symbol will show on display. -30-...
  • Page 33: Film Type

    3. Film Type Film Type Change film type definition by enter Film Type menu when power on Rollei DF-S100 SE or access the main menu by Home icon if during operation. Press down button for Film Type and press OK to confirm.
  • Page 34 3.2 Film Type: Example Color Negative film B&W Loaded Negative film Into Cartridge Slide -32-...
  • Page 35 After finished capture, user can download the stored images from internal memory or SD card to PC by selecting USB mode. Press OK button when connect USB cable to PC, Rollei DF-S100 SE becomes a mass storage device. User can review or edit images once PC detected the external storage device.
  • Page 36 5. Setting Mode. Setting mode The setting mode covers TV out and format option. User can connect the device to TV and finish the operation with TV display. Moreover, the scanned images can be playback on TV display to share with family. If the SD card was formatted by the other devices and not readable by scanner, user can apply the format function in scanner to correct required format.
  • Page 37 5.2 Setting: TV out When user want to switch the display from on device LCD to TV display, user can connect device to TV and select PAL or NTSC as required in TV out menu by OK button. Then, the TV display will show the same option for scanning operation.
  • Page 38 Good bye page -36-...
  • Page 39: Specification

    V. Specification Image Sensor: 5 mega CMOS sensor Lens: Multi-elements precision lens LCD: 2.4’’ Color TFT LCD Internal memory: 4MB Flash (not for saving images) Focus Range: Fixed focus Exposure Control: 7 levels of control Color Balance: 7 levels of control Scan Quality: 1,800dpi Data Conversion:...
  • Page 40: Declaration Of Conformity

    Declaration of conformity The Manufacturer hereby declares that the CE marking was applied to the Rollei DF-S 100 SE in accordance with the basic requirements and other relevant provisions of the following CE Directives: 2011/65/EC RoHs Directive 2004/108/EC EMC Directive The EC Declaration of Conformity can be requested from the address specified on the Warranty card.

Table of Contents