Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Rollei DF-S 100 SE
Summary of Contents for Rollei DF-S 100 SE
- Page 1 DF-S 100 SE -Patent pending- User Manual...
- Page 2 Index I. Unpack Rollei DF‐S 100 SE.…………........2 II. Install film in the film holder..........3 III. Quick Start...............6 IV. Operation Guide.............11 V. Specification..............30 ‐ 1 ‐ ...
- Page 3 Unpack Rollei DF-S 100 SE Rollei DF-S 100 SE Negative/Slide Film Holder User Manual USB power core USB/Video cable Clean brush Note We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation.
- Page 4 II. Install film into the film holder Install the Slide into holder ● 1. Open the slide holder as illustrated 2. Put slide into positive slide slot 3. Close the film holder Install the Negative Film into holder ● 1. Open the film holder as illustrated ‐ 3 ‐ ...
- Page 5 2. Install film into negative film slot 3. Close the film holder Note To avoid mirror image, follow the serial numbers (from left to right) on top of film when install negative film into holder Figure 1 If the image is upside down [see fig.2], the image can be corrected by Flip function with the Flip hard key of the device before capturing, or enter playback edit menu after capturing [see fig.3.4]. ...
- Page 6 Down/Flip button (Flip hard key) Flip Press flip hard key on top of device during live view ● Figure 3 Playback mode menu ● Figure 4 ‐ 5 ‐ ...
- Page 7 III. Quick Start Power button Power status LED Up/Mirror button OK button Down/Flip button Film Slot SD card Slot USB port TV out jack ...
- Page 8 1. Put Film in the film cartridge 2. Insert the film cartridge into Rollei DF‐S 100 SE ‐ 7 ‐ ...
- Page 9 3. Connect USB cable to Rollei DF‐S 100 SE 4. Turn on Device with the power button ‐ 8 ‐ ...
- Page 10 5. Press OK button to capture the image 6. Follow the menu on display for scanning ‐ 9 ‐ ...
- Page 11 7. After the capture is finished, take out the SD card which stored capture images 8. Or read picture from PC by MSDC mode ...
- Page 12 IV. Operation Guide Home: Main menu Capture Playback Film Type Setting USB mode Capture: capture mode (default) ● Playback: playback mode ● Film Type: define the film type which loaded in cartridge ● USB mode: MSDC (Mass Storage Device Class) mode ● Setting: TV out and format option ● 1. Capture Capture ...
- Page 13 1.1 Capture: Mirror/Flip (Hard Key) Down/Flip button Up/Mirror button Mirror Press Up/Mirror button to change image left to right ● Flip Press Down/Flip button to upside down image ● ‐ 12 ‐ ...
- Page 14 1.2 Capture mode Live view indicator (flashing at 0.5sec rate) In the capture mode, there will be a red indicator on left top corner to indicate the live view mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive image according to previous defined Film Type (the default setting is "Negative Film"). Reconfirm the film position on the display before pressing the OK button. 1.3 Capture: Edit Menu Save Selected image Rotate +90 Rotate ‐90 ...
- Page 15 1.4 Live View ‐> Capture/Edit Menu Live View Capture/Edit Menu Pressing the OK button in live view mode, the edit menu appears on the screen. Pressing the OK button again, the current image will be saved on the SD Card. The live view mode appears on the screen again. 1.5 Capture: Save Save After pressing the OK button the preview (live view) image will be selected and shown for 3‐4 seconds with the 4 icons on the left side of the screen. The save icon is highlighted to confirm the saving. Press OK button to save the picture. The live view mode appears on the screen again. ‐ 14 ‐ ...
- Page 16 1.7 Capture: Cancel Playback /captured image Select Cancel and press OK button to cancel any of the editing step with present selected image and Rollei DF‐S 100 SE goes to live view mode (nothing will be saved on the SD Card). ‐ 15 ‐ ...
- Page 17 1.8 Capture: Home To enter the main menu, highlight the Home icon and press OK button. 1.9 Exit from Edit mode back to Capture mode (Live View) Next image in film cartridge After saving or canceling the picture the capture mode/live view mode appears on the screen again. Move the film cartridge to the next image for editing or capturing. ‐ 16 ‐ ...
- Page 18 1.10 Memory full When the internal memory or SD Card is full, an icon "Full" appears on the screen. Please download the pictures from the internal memory to your computer or use another SD Card to continue. 1.11 SD card locked SD card locked indicator If an "SD Card locked" icon appears on the screen, please unlock the SD Card (slide the lock switch on the SD Card to the unlock position). ‐ 17 ‐ ...
- Page 19 1.12 SD card error SD card error indicator If the "SD Card Error" Icon appears on the screen, please take the SD card out and insert it again. If the fault still appears, try to format the SD Card (Caution: With the format option all files on the card will be deleted!), or use another SD Card to continue the further operation. (Refer to Setting selection on page 31).
- Page 20 2. Playback Playback To enter the playback mode access the Main menu (Home icon) and highlight the playback icon. Press OK button to confirm the selection. 2.1 Playback: Auto Slide Show Slide show mode In the playback mode (default setting is slide show) the Screen will auto display all images stored on the SD Card with a 2 seconds interval. To stop the slide show, press OK ...
- Page 21 2.2 Playback: Edit Menu Exit Rotate +90 Rotate ‐90 Delete Save Mirror Flip Home Rotate +90: captured image rotate +90 degrees ● Rotate ‐90: captured image rotate ‐90 degrees ● Mirror: change image left to right ● Flip: upside down image ● Exit: returns to Slide show ● Delete: delete this picture stored on SD card ● Save: save the modified image on SD card ●...
- Page 22 2.4 Slide Show ‐> Single picture ‐> Edit mode Pause OK Single picture mode Edit mode Slide show mode Use Up/Down button to scroll to the picture to be modified 2.5 Playback: Rotate/Mirror/Flip/Save To rotate a picture highlight the rotate function and press OK button. The save icon will be highlighted after rotating. Press OK button again to save modified result and next picture will be shown (N+1). For continuously Rotate +90 degrees, move cursor to Rotate ...
- Page 23 2.6 Playback: Exit When selecting the Exit function in the edit menu, the display will go back to slide show starting with the current picture in internal memory or SD card without saving any change of present picture 2.7 Playback: Delete To delete the present selected picture, highlight the Delete Icon and confirm it with OK button. The next Picture will be shown (N+1). Cursor goes to Exit icon. If user intend to process continuously delete, just move to delete icon again and press OK to confirm. ...
- Page 24 2.8 Playback: Home To enter the main menu, select the Home icon and press OK button. 2.9 Playback: No Picture If there is no picture on the internal memory or SD card when enter playback mode, a "No picture icon" will be shown on display. ‐ 23 ‐ ...
- Page 25 3. Film Type Film Type To change the film type definition enter the main menu (Home icon). Highlight the film type icon and confirm with OK button. 3.1 Film Type: Select Film Type Color Negative film Slide B&W Negative film Negative film: select Negative film when cartridge loaded with negative film ● Slide: select Slide type when load slide in holder ● B&W film: select B&W when cartridge loaded with Black&White negative film ● Highlight desired film type and confirm with OK button. ● ‐ 24 ‐ ...
- Page 26 3.2 Film Type: Example Color Negative film B&W Loaded Negative film into Cartridge Slide ...
- Page 27 USB mode Please select the USB‐Mode icon to download the stored pictures from the internal memory or SD Card to your PC . Connect the Rollei DF‐S 100 with the USB Cable to your computer and confirm the USB mode with the OK button. A Mass storage device will be installed to your computer. Open "My computer" to find the external storage device. Or insert the SD Card in a SD‐Card reader to download the pictures directly. ...
- Page 28 5. Setting Mode Setting mode For the TV‐Out and Format options enter the Setting mode in the main menu (Home Icon). You can connect the Rollei DF‐S 100 SE to a TV to edit the pictures or to view the scanned pictures on the TV display. Use the format option to format a faulty memory card. Caution: All Files on the card will be deleted! 5.1 Setting Mode TV out Format Exit TV out: select NTSC or PAL according to required interface ● Format: format internal memory or SD card ● Exit: returns to main menu ● ‐ 27 ‐ ...
- Page 29 To connect the Rollei DF‐S 100 SE to a TV, select the option "TV" and confirm with OK button. Select the desired TV signal (PAL or NTSC) and press OK button again. The TV Display will show the same screen as the Rollei DF‐S 100 SE and you can view, edit or ...
- Page 30 Good bye page When switching the Rollei DF‐S 100 SE off, the Goodbye screen appears on the screen. ‐ 29 ‐ ...
- Page 31 V. Specification Image Sensor: 5 mega CMOS sensor Lens: F no.=2.0, 4 Glass elements, LCD: 2.4’’ Color TFT LCD Internal memory: 24MB NAND Flash (for saving images) Focus Range: Fixed focus Exposure Control: Automatic Color Balance: Automatic Scan Quality: 1,800 dpi Data Conversion: 10 bits per color channel Scan Method: Single pass Light Source: Back light (3 white LEDs) Interface: USB 2.0, TV‐out (video 3.5mm jack) USB Configuration: Mass Storage Device Class/MSDC Power: 5V adapter, or USB power Dimensions: 82x86x152mm Weight: 0.41kg ...