Mouse; Specifications; Removal Procedure; Replacement Procedure - IBM RT PC 10 Hardware Maintenance And Service

Mouse
The Mouse is a locator device used to control the system. The function
controlled by the Mouse is determined by the program.
The Mouse is a single field-replaceable unit.
See the IBM RT PC Guide to Operations for the cleaning procedure.
Specifications
Removal Procedure
Number of buttons
Connector
Power
2
6-Pin keyed
From the system unit
1. Do the "Rear Cover Removal" on page 4-10.
2. Pull the mouse cable connector out from the mouse connector on the
system unit.
Replacement Procedure
1. Push the mouse cable connector into the mouse connector on the system
unit.
2. Do the "Rear Cover Replacement" on page 4-11.
10-6 Service Manual