IBM RT PC 10 Hardware Maintenance And Service page 214

4. Remove the fixed disk and diskette drive adapter from slot 6 and place it
on top of the system unit with the cables attached.
5. Remove all of the remaining adapters and boards. Record the type and
slot position of each (pages 4-16 or 4-14).
6. Disconnect the power connectors from the system board.
7. Disconnect the operator panel cable from the system board.
8. Disconnect the battery cable from the system board.
m§::E§f~=gffl;:r:~Q>:========::j~~-Mouse
Connector
i"-7---------~-Keyboard Connector
Power
Connector
Power
Connector
I .....
~II
. . . . .
•
Removal and Replacement 4-43