Keyboard; Specifications; Removal Procedure; Replacement Procedure - IBM RT PC 10 Hardware Maintenance And Service

Keyboard
The Keyboard contains the system speaker.
The Keyboard is a single field-replaceable unit and cannot be serviced in the
field..
Specifications
Removal Procedure
Number of keys
Connector
Power
U.S., 101
WT,102
6-Pin keyed
From the system unit
1. Do the "Rear Cover Removal" on page 4-10.
2. Pull the keyboard cable connector out from the keyboard connector on
the system unit.
Replacement Procedure
1. Push the keyboard cable connector into the keyboard connector on the
system unit.
2. Do the "Rear Cover Replacement" on page 4-11.
10-4 Service Manual