Care and cleaning.
Cleaning the Exterior Door Panel
Before cleaning the front panel, make sure you
know what type of panel you have. Referto the
last two letters of your model number. Vou can
locate your model number on the left-hand tub
wall just inside the door. If your model number
ends with BB,CC,WW, SA or ESthen you have
a painted door panel. If your model number
ends with SS,then you have a StainlessSteel
Door panel. If your model number ends with II,
then you have an Integrated door panel.
Follow the instructions below for cleaning the
door panel for your specific model.
Painted Door Panel (model numbers ending in
BB-black, CC-bisque, WW-white, SA-silveror
Use a clean, soft, lightly dampened cloth, then
Stainless Steel Door Panel (modelnumbers
ending in SS)
The stainless steel panels can be cleaned with
StainlessSteel Magic or a similar product using
a clean, soft cloth. Do not use appliance wax,
polish, bleach or products containing chlorine
Do not usescouring pads or powder cleaners
because these products can scratch the finish.
You can order StainlessSteelMagic #WXlOX29
through GE Parts by calling 1.877.959.8688or
visiting GEApplianceparts.com In Canada, call
Integrated Door Panel (model numbers ending
This is a custom installed door panel, and you
will need to refer to the cabinet manufacturers
recommendations for proper cleaning.
Cleaning the Control Panel
To clean the control panel, use a lightly
dampened cloth. Then dry thoroughly.
Cleaning the Dishwasher Interior
To clean and de-odorize your dishwasher,
use citric acid or Lemi Shine@*, a detergent
additive. Lemi Shine will break up mineral
deposits, and remove hard water film and
stains. You can order citric acid #WD35X!5!
through GE Parts by calling 877-959-8688 or
You can purchase
Lemi Shine at your local grocery store or by
calling GE at the numbers above and ask for
Stainless Steel Inner Door and Tub
Thestainless steel usedto make the dishwasher
tub and inner door provides the highest
reliability available in a GEdishwasher.
If the dishwasher tub or inner door should
be scratched or dented during normal use,
they will not rust or corrode. These surface
blemishes will not affect their function or
* Lemi Shine@ is a registered trademark of Envirocon Technologies, Inc.