GEIGER 446F6 Series Installation Instructions

Installation Instructions
Bevel gears
Series 444F6../446F6../456F6..

Installation and rotation direction

Front-mounted rolling shutter
L

Switching of the rotation direction

Built-in rolling shutter
R
For gears pre-set for right fitting, turn tube
drive to the right ...
... until the latching elements of the overrun
clutch are released and the switch mecha-
nism is free (before the overrun clutch locks in
again!)
Turn switch mechanism to the left until it
stops ...
... and turn tube drive to the left until the
latching elements of the overrun clutch
snap into place.
R
Gerhard Geiger GmbH & Co. KG | 100W0331 EN 1118
L