Advertisement
Can
be used in conjunction with either the hedge trimmer or the chainsaw attachments.
SPECIFICATIONS:
1 x aluminium 61cm pole supplied.
Line Trimmer:
12cm diameter double line bump feed spool. 45cm trim width.
Brush Cutter: Triple edged blade with max.10" trim width.
Fitting the guard to the brush cutter/line trimmer shaft
:
Slide the chromed metal guard holder already affixed to the shaft into the recess in the plastic guard.
Line up the 4 holes. Fix and tighten the 4 bolts supplied.
Attaching the brush cutter blade:
Push the bush and the blade seat onto the end of the shaft. Then put the blade onto the seat. Fit the
domed cover, then the securing nut and tighten the nut anti‐clockwise. If a split pin is provided, fit.
To remove, first remove the split pin (if fitted), line up the 2 holes and push a screwdriver or other
metal shaft through. Hold tightly and turn the nut clockwise using a wrench.
Advertisement
