Error Messages During Start Up; Other Error Messages - Sagem MyX-4 Technical Documentation Manual

3.3

ERROR MESSAGES DURING START UP

Message
WARNING UNTUNED
RADIO
PB IMEI
SIM MISSING
IMEI ERROR
UNTUNED
UNKNOWN BATTERY
MOBILE PHONE LOCKED
SIM BLOCKED
SIM LOCKED (with SIM)
SIM LOCKED (without SIM)
BATTERY TOO LOW
Note: SAGEM factory return can concern either the card, or the mobile, according to instructions
given to the CRAs.
3.4

OTHER ERROR MESSAGES

Message
"BUSY"
"K.PAD LOCKED PRESS *V"
"OPTION NOT AVAILABLE"
"PROG.KEY NOT VALID"
"ERROR!!"
"NOT REACHABLE"
"NOT AVAIL."
"PIN ERROR"
"PIN2 BLOCKED"
"PUK ERROR"
"PUK2 BLOCKED"
"CODE ERROR"
"NOT AVAIL."
"TRY AGAIN"
Ref. SCT U38 SSC DTS 0022 – Index A - july 30, 200429/03/01
Meaning
Invalid EEPROM field (SAGEM)
Consistency problem at IMEI level
SIM card missing or badly inserted
Consistency problem at IMEI level
Mobile not configured
Battery not recognised by the mobile
Number of seizures of
exceeded
Three bad PIN codes have been input
SIM card not adapted to the operator
Attempt of corruption ( EEPROM fields)
Battery state
"Problems" related to the network and Communications
Keypad locked
Menu not available for this product version
Input "Problems"
Calculation error with the calculator (division by zero)
Call forwarding if the mobile is not reachable
Not available
" PIN input problems "
Following input errors
Following input errors
Following input errors
The phone code input for locking the mobile is incorrect
Service not implemented in the network
Following a network problem
Technical Site Documentation – myX-4
SAGEM Factory Return
SAGEM Factory Return
Insert the SIM card
SAGEM Factory Return
SAGEM Factory Return
Replace the battery
sim locked code SAGEM Factory Return
Not repair under
warranty
Contact the operator
Replace the SIM card
SAGEM Factory Return
Not repair under
warranty
Replace the battery
Meaning
Procedure
Page 3-20