First Contact - Helios KWL-WSU Series Manual

The timer is delivered in so-called sleep mode.
To activate without a service voltage:
Briefly press the Menu key.
Activate with mains voltage:
According to version the timeswitch is already pre-
programmed with the actual time, the weekday, and
the changeover setting for Summer / Winter time, the
actual time and status display appears after selection
of the National language.
If the timer is not pre-programmed:
First select your National language and then enter the
actual date and time.
For programming, viewing, amending or
deleting
First of all read the text display.
Menu selection:
Select by pressing the Prog key.
Confirm by pressing .
By pressing the key select the desired menu.
e.g. New, View, Amend or Delete.
Confirm your selection by pressing
Set or change: by pressing or
Store by presssing .
To display the switching times:
In the menu View, press the key several times.
In emergency situations only: Should you press RESET on the timer, all stored data will be deleted. However, the timer will then still display the language last
selected and the summer / winter norm time changeover last selected. Press the Res key with and a pointed object for approx. 1 second.
Selection of the national language
.
.

First contact

Initial operation
According
to version
Activate the clock,
select the national language
By pressing the or key select your
national language.
Store your selection by pressing the
key.
Yes
The decision , confirms the
selection or programming.
No
The decision , means
continue.
Set or amend by pressing the
or keys.
2