Bluetooth - Audio - Kenwood KMM-BT728HD Instruction Manual

Bluetooth®
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly (or press SRC on the remote control) to select
BT AUDIO.
• For /
2
Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press 6 IW.
Select group or folder Press 2
Press S / T.
Reverse skip/
Forward skip
Reverse/Fast-forward Press and hold S / T. Press and hold S /
: Pressing enters BT AUDIO directly.
On the remote control
Press ENT IW.
/ 1 . Press #FM+/ AM–.
Press S / T (+).
T (+).
To
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Depending on the connected device, some devices may not support this feature.
Operations and display indications may differ according to their availability
on the connected device.
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 11)
• If you plug in an iPod/iPhone to the USB input terminal while listening
to iPod BT source, the source automatically changes to iPod FRONT/
iPod REAR/iPod USB source. Press B SRC to select iPod BT source if the
device is still connected via Bluetooth.
On the faceplate
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*,
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM]*.
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 13.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)
ENGLISH
27