Wiring Connection - Kenwood KMM-BT728HD Instruction Manual

Installation/Connection

Wiring connection

To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse
box
Battery
To the metallic body or chassis of the car
Fuse (10 A)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
IMPORTANT
We recommend installing the unit with a commercially available custom wiring harness specific
for your car and leave this job to professionals for your safety. Consult your car audio dealer.
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote control wire)
Antenna terminal
To connect the KENWOOD navigation system, refer your
navigation manual
To the power control terminal when using the optional
power amplifier or to the antenna control terminal in the
vehicle
(For /
/ /
)
To the steering wheel remote control adapter
(For )
To KENWOOD Marine Remote Control unit (optional
accessory)
For the latest information on marine accessories, visit
<http://www.kenwood.com/usa/car/marine/>
ENGLISH
/
/
37