Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
Installation (See drawing)
AC adaptor (option)
230V
Door Bell button
Door Bell
1 - Insert the 4 battery type AA in the compartment
(option).
2 - Connect the adaptor 7.5V DC/1A (option).
Electrical connection : The apparatus is designed to
operate from a 230V 50Hz supply only. (Classified as
«hazardous voltage» according to EN60950 standard).
The apparatus does not incorporate an integral power
on/off switch. To disconnect the power, either switch off
supply at the mains power socket or unplug the AC
adaptor. When installing the apparatus, ensure that the
mains power socket is readily accessible.
2
Advertisement
Table of Contents
