Installation - Geermarc AMPLICALL16 Manual

Installation (See drawing)
230V
1 – Insert the 23A 12V battery into the door bell.
2 – Insert the 4 (AA) batteries into the battery
compartment main unit or connect the adaptor 7.5V
DC/1A (optional).
Electrical connection : The apparatus is designed to
operate from a 230V 50Hz supply only. (Classified as
«hazardous voltage» according to EN60950 standard).
The apparatus does not incorporate an integral power
on/off switch. To disconnect the power, either switch off
supply at the mains power socket or unplug the AC
adaptor. When installing the apparatus, ensure that the
mains power socket is readily accessible.

INSTALLATION

AC adaptor (optional)
Door Bell button
Door Bell
2