1. Manuals
  2. Brands
  3. frako Manuals
  4. Controller
  5. EML 1101
  6. Operating manual

frako EML 1101 Operating Manual

Hide thumbs Also See for EML 1101:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Safty Instructions
Important: Read Before Commissioning
•
The user must ensure that all operators are familiar with this operating manual and
follow it at all times.
•
The operating manual must be read carefully before the instrument is mounted,
installed and commissioned.
•
All actions taken must follow the operating manual.
•
Installation and commissioning may only be carried out by appropriately qualified
personnel with due regard for all rules and regulations that are in force.
•
When the instrument is connected to mains voltage, it must not be opened.
•
If the instrument is visibly damaged, it must not be installed, wired up or
commissioned.
•
If the instrument does not work after commissioning, it must be
the mains.
•
Any further laws, standards, guidelines, etc. relevant to this product must be
complied with.
Additional information on EML 1101 Maximum Demand Controller and Add-on
station EMD1101
•
Loads
which may cause damage or danger when disconnected by EML1101 or
EMD1101 must
•
The responsibility for correct load settings, such that proper operation is
guaranteed and no damage or danger arises, remains 100% with the customer.
not be connected to the load channels.
disconnected
from
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EML 1101 and is the answer not in the manual?

Questions and answers

Related Manuals for frako EML 1101

Summary of Contents for frako EML 1101

  • Page 1 • Any further laws, standards, guidelines, etc. relevant to this product must be complied with. Additional information on EML 1101 Maximum Demand Controller and Add-on station EMD1101 • Loads which may cause damage or danger when disconnected by EML1101 or EMD1101 must not be connected to the load channels.

  • Page 2: Table Of Contents

    Operating manual EMD1101 Table of contents Table of contents Contens Page Quick Start ..........................3 Description..........................4 Function............................4 Function on fault ..........................4 Installation..........................5 Mounting............................5 Electrical connection........................5 Commissioning..........................6 Defining the consumer status on fault ..................6 Basic settings ..........................7 Setting the station number ......................7 Testing............................7 Operation............................8 Technical data..........................9...

  • Page 3: Quick Start

    Quick Start Operating manual EMD1101 1 Quick Start • Installation: Important: The connections for the power supply voltage are externally protected by 2A semi-time lag fuses. When working on the EML1101 the device must be switched voltage free. Caution: Do not switch on the a power supply before the upper housing unit has again been assembled! Undo the screws on the side.

  • Page 4: Description

    The EMD 1101 add-on stations are connected to the EML 1101 maximum optimisation computer via the add-on bus. Depending on the type of EML 1101 maximum optimisation computer, up to 4 or max 10 EMD 1101 add-on stations can be connected to the add-on bus. Thus there are a total of maximum 36 or 84 consumer channels available.

  • Page 5: Installation

    Installation Operating manual EMD1101 3 Installation 3.1 Mounting • Undo the screws on the side. • Remove the black base. • Attach the base and terminal strip on the rail from the bottom. 3.2 Electrical connection • Insert the cable. •...

  • Page 6: Commissioning

    Operating manual EMD1101 Commissioning 4 Commissioning 4.1 Defining the consumer status on fault • Set the consumer status required on fault using the DIP switches labelled ”Consumer on fault ”. The "On" position of a switch therefore means that the consumer is switched on in cases of fault.

  • Page 7: Basic Settings

    Note: • Station numbers can be selected from 1 to 10 with ”0” standing for 10. • For one EML 1101 maximum optimisation computer with up to 4 EMD 1101 station numbers can be selected from 1 to 4. • For one EML 1101 maximum optimisation computer with up to 10 EMD 1101 add-on units station numbers can be selected from 1 to 10.

  • Page 8: Operation

    Operating manual EMD1101 Operation 6 Operation The EMD 1101 add-on station has no operating elements and requires no operation at the instrument itself.

  • Page 9: Technical Data

    Technical data Operating manual EMD1101 7 Technical data Mechanical construction: Housing: Grey plastic Dimensions ( W x H x D ) 158 x 75 x 120 mm Weight: approx. 0.8 kg Power supply: Power voltage: 230VAC, -15 to +10% Frequency: 50 to 65 Hz Power consumption: Outputs:...

  • Page 10: Troubleshooting

    An incorrect station Set the correct station number. number has been set. The connection to the Check connection to the EML 1101 EML 1101 maximum maximum optimisation computer. optimisation computer (Have connection A and B been is not correct or is swapped over?) faulty.

  • Page 11: Connection Diagram

    Connection diagram Operating manual EMD1101 9 Connection diagram...

Table of Contents