Mute Function - Binatone Spirit 410 User Manual

Mute
1
Function
2
Inserting a
Pause in
the dialing
sequence
Use on PBX
Making a call
from the
1
outgoing call
records
2
3
Binatone Help Line - 0845 345 9677
During a call press MUTE
When the mouthpiece is muted, the person
at the other end of the call cannot hear you
but you can hear his side.
To get back to the call, press MUTE
button again to release.
For some switchboard system, an access number
must be dialed (usually an 8 or 9) to get another
dial tone and an outside line.
Pressing PAUSE button immediately after the
access number, a pause of about 3.6 seconds
will be entered, and the desired number can be
dialed immediately.
Press PAUSE button to insert a pause when
dialing or storing Long Distance Access Codes.
If you are using your Spirit 410 phone on a PBX,
and the PBX user guide tells you to press RECALL;
Press R (RECALL) button on your Spirit 410 phone.
The telephone remembers the last 5 outgoing calls.
In waiting mode, press CHECK button.
CHECK
The most recent outgoing call number and
duration will be displayed.
Press CHECK repeatedly to find the record you
CHECK
wish to call.
Press BACK button to auto-redial.
BACK
Calls are charged at Local Call rate.
10
button.