Sealey Quality MACHINERY SM15.V2 Instructions page 3

5.4. Table adjustment (0° to 45°):
5.4.1. Loosen the screw (20) which clamps the angle gauge (7).
5.4.2. Adjust the table to the desired angle and tighten the screw.
5.5. Sanding arm vertical adjustment:
5.5.1. Remove safety cover (40) and loosen the two nuts (37), see fig. 8. only one nut
is visible in the illustration.
5.5.2. Raise the arm to the vertical position and tighten the nuts.
5.5.3. Fit table assembly to support post on base.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
SM15.V2
fig. 7
fig. 8
Issue: 3 - 11/04/12