Download Print this page

WENPOD X1 Quick Start Manual

This quick start guide is designed for a first time user. Please refer to the full user guide for more detailed information.

A. CHARGE BATTERY

1. Flip open the charging port

cover and insert the mini USB

cable into the charging port.

Plug the other end to your

computer USB port or any

USB charging device of 1A.

QUICK START GUIDE

2. When finished charging,

unplug the cable and cover

the charging port with the

cover.

B. INSTALL MOUNTING - install X1 on your desired GoPro mount

Bike mount

Wearable mount

Helmet mount

Selfie stick mount

Table of Contents

Need help?

Do you have a question about the X1 and is the answer not in the manual?

Page 1 QUICK START GUIDE This quick start guide is designed for a first time user. Please refer to the full user guide for more detailed information. B. INSTALL MOUNTING - install X1 on your desired GoPro mount A. CHARGE BATTERY Bike mount Helmet mount 2.
Page 2 For Actioncam Slide open 2 side clip, and flip down the support at the bottom. Slide the actioncam with the transparent protective case onto the clip as shown. WWW.WENPOD.COM WENPOD is a registered trademark of Gazercam Limited...
Page 3 Press brieftly the RED power button on the side TWICE to turn off. IMPORTANT: When Power on, please hold the device with one hand and hold the motor with the other hand. WWW.WENPOD.COM WENPOD is a registered trademark of Gazercam Limited...