Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for WENPOD MD2
Summary of Contents for WENPOD MD2
- Page 1 User Guide...
- Page 2 World First TIME-LAPSE Function Built-in Neuron technology Compact in Size Lightweight Intelligent...
-
Page 3: Table Of Contents
Single-handed Side Position DO NOT disassemble, modify, puncture, shock, drop, crash and/or short circuit the Mount on Tripod - TIME-LAPSE function of MD2 battery. Leakage, smoke emission, ignition, explosion or fire can occur, which may result Mount on Steadicam Harness in personal injury or property damage. -
Page 4: Battery Disposal
Always use the dedicated WENPOD charging adaptor ONLY. Failure to do so may cause a fire, which may result in personal injury and/or property damage. Always inspect the battery before charging. Always unplug the adaptor after charging, and let the charger cool between charges. -
Page 5: What's In The Box
What’s in the box Product Specification Model Dimension L 350mm MD2 Stabilizer Focus-tracking W 245mm Tube H 280mm Weight 1.5kg Loading weight Battery type LiPo Battery Battery Spec. 14.8V 2400mAh Handle bar User Guide Operating time 180-360 min. under normal temperature Charging time 120 min. -
Page 6: Gimbal Description
Pan balance adjustment 2. Connect the charger to an AC power source. (forward / backward) 3. Connect the charger to the MD2 charging port. [15] Multifunction mode button 4. There is an charging indicator light on the battery compartment. When it is charging, the... -
Page 7: Mounting The Camera
Tighten the knob when pan axis inserted, camera battery has been installed balance is achieved. and other accessories have been installed. After all 3 axes are balanced, your MD2 is ready to use. -
Page 8: Install Handle
MD2 is now ready to use. * If MD2 is idle / not being used, you may power off the device to preserve battery. If it is not used for long period of time, it is highly recommended to remove the smart battery. -
Page 9: Gimbal Operation
• To control the left and right pan direction. perform for low angle position shooting. • By default, MD2 will start in pan locking position. The camera will always stay in one direction. • By pressing down the left joystick, MD2 will enter the “FOLLOW-ME MODE”. In FOLLOW-ME MODE, the camera will follow your movement, while stabilizing all motions. -
Page 10: Inverted Position
FOLLOW-ME MODE. This will faciliate motion shot in low angle position. Single-handed Side Position Mount MD2 onto the tripod using the screw hole under MD2. In this mode, you may activate the TIME-LAPSE function of MD2. In inverted position, let go one hand while How to activate the Time-Lapse function: holding the handle with the other hand. -
Page 11: Mount On Steadicam Harness
GIMBAL ATTENTIONS Please do not store / operate MD2 close to the magnetic field, water or under high MD2 can be mounted on Steadicam Harness over the univseral 1/4 or 3/8 inch screw hole temperature and high humidity and corrosive environment, in order to avoid damages to under the bottom pan axis motor. -
Page 12: Frequently Asked Questions
AFTER SALES SERVICE Please contact your local dealer for after sales service. LEGAL STATEMENT All rights are reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gazercam Limited.
Need help?
Do you have a question about the MD2 and is the answer not in the manual?
Questions and answers