general information
EN
1.4
dimensions
30 1/2"
(774.7mm)
1.5
shipping bracket
!
WARNING
•
The top casting is not fastened to the appliance assembly. It simply sits on the appliance as a lid. For shipping
purposes, it is held in place by plastic strapping. Once the strapping is cut, the top should be lifted off care-
fully and stored in a safe place to avoid damage while completing the installation of the appliance. To avoid the
appliance being damaged during shipping, a shipping bracket has been used and must be unbolted before the
appliance can be installed.
SHIPPING BRACKET REMOVAL
A.
Remove the four screws holding the shipping bracket to the bottom of the appliance.
B.
Lift the appliance off the skid and set on a fl at surface.
C.
Discard the screws, brackets, and skid.
8
W415-1966 / 07.08.19
17 7/8"
(454mm)
SHIPPING BRACKET
17 3/4"
(450.9mm)
27"
(685.8mm)