Finishing; Cast Front Removal; Logo Placement - Napoleon Knightsbridge VF Series Installation And Operation Manual

!
WARNING
• Risk of fi re!
• Never obstruct the front opening of the appliance.
• Do not strike, slam, or scratch glass. Do not operate appliance with glass removed, cracked, broken, or
scratched.
5.1

cast front removal

!
WARNING
• Front / screen must be in place while appliance is in operation.
A.
Lift the top casting off the
appliance.
B.
Loosen the securing bolts
on the cast front off of each
of the respective retainer
brackets (located at either
side on the top). Lift the
front casting off and place
the cast front face down on
a protective surface such as
carpet or blanket to avoid
scratching the fi nished
surface.
C.
To re-install the front, repeat
in reverse order and ensure
bottom locating tabs engage
on either leg.
5.2

logo placement

Remove the backing of the logo supplied and centre over the
logo installation holes, as indicated.
CAST FRONT
SECURING BOLTS
SCREEN
SECURING BOLTS
BOTTOM
LOCATING TABS
5.0 fi nishing
TOP
RETAINER
a
FRONT
LOGO
W415-1966 / 07.08.19
EN
13