Charging Nimh And Nicd Batteries - Medion MD 11954 Manual

up at the same time. The operational LED will light up after
this, in order to indicate that there is an electricity supply.
The OK symbol will appear on the display for each charging
slot and the corresponding check LEDs will go out if no
batteries have been inserted.

Charging NiMH and NiCd batteries

•
Set the function switch to the NiCd or NiMH battery type.
•
Place the rechargeable batteries (batteries) of the NiMH or
NiCd battery type that you want to charge into the
corresponding charging slots.
NOTE:
Do not place more than one rechargeable battery
(battery) into one charging slot!
•
The charging status of the batteries inserted will be
recognised and the charging or the discharging process
(only NiCd) will be started after approximately two
seconds. The charging status of battery sizes AAA, AA, C
and D will be indicated as follows in the display:
Check LED
Display
symbols
14