Contents Overview ..................3 Device parts ..................4 About these operating instructions ..........7 Proper use ..................10 Safety information ................. 11 Scope of delivery ................18 Wall mounting ................19 Operation ..................20 Description of the charging cycle ..........25 Reverse polarity protection ............
Device parts MODE button Display Fixing holes Power cord with plug Connection lead with ring terminals Negative terminal clamp (black) with connection lead Fastening screws Positive terminal clamp (red) with connection lead 12 V / 0.8 A charging mode active – standard charging 12 V / 3.8 A charging mode active –...
Page 5
Contents Contents Overview ......................3 Device parts ..................... 4 About these operating instructions ............... 7 Key to symbols ..................... 7 Proper use ......................10 Safety information ..................11 Setting up the device ..................14 Charging ......................15 Handling rechargeable batteries ..............16 Scope of delivery ....................18 Wall mounting ....................19 Operation .......................
Page 6
Contents Technical specifi cations ................. 30 Declaration of Conformity ................30 Service information ..................31 Privacy statement ..................32 Legal Notice ....................33...
About these operating instructions About these operating instructions Thank you for choosing our product. We hope you enjoy using it. Read the safety instructions carefully before using the device for the fi rst time. Note the warnings on the device and in the operating instructions. Always keep the operating instructions close to hand.
Page 8
About these operating instructions Warning – explosive substances hazard! Warning – chemical burns hazard! This symbol provides useful additional information for assembling or operating the device. Take note of the information in the operating instructions. Protection class II Protection class II electrical devices are electrical devices that have double and/or reinforced insulation throughout and do not have any connection options for a protective conductor.
Page 9
About these operating instructions – negative polarity IP65 This device is equipped with protection class IP65 in accordance with DIN EN 60529, meaning that: • The device is dust proof and completely protected from contact. • The device is protected from water spray (nozzle) from all directions.
Proper use Proper use This device is a charger connected on the input side. It has a trickle charging function. It is suitable for charging and trickle-charging the following rechargeable 6 V or 12 V lead-acid batteries with electrolyte solution or gel as well as AGM batteries that are used in motor vehicles: –...
Safety information • Only use replacement parts or accessories that we have supplied or approved. • Observe all the information in these operating instructions, especially the safety information. Any other use is deemed improper and might cause personal injury or damage to property.
Page 12
Safety information − This device can be used by children 8 years and older and by people with reduced physical, sensory or mental capacity or with a lack of experience and/or knowledge but only under proper supervision or if they have been instructed on how to use the device safely and have understood the risks involved.
Page 13
Safety information − In the event of a storm, devices connected to the power grid can be damaged. For this reason, you should always switch off the power point and pull out the plug if there is a storm. − Before using for the fi rst time and after each use, check the device and the power cord for damage.
Safety information The device must not be immersed in water or other liquids or held under running water because this can result in an electric shock. − Switch off the device at the power point and pull out the plug: –...
Safety information Charging WARNING! Explosion hazard! Improper handling of the charger can lead to sparking and can trigger an explosion. Gaseous hydrogen can escape from the battery during the charging and discharging process. Contact with open fl ame will cause a highly explosive oxyhydrogen reaction. −...
Safety information − Avoid creating sparks when connecting and removing the charger: – Avoid an electrical short-circuit when connecting the charger to the battery. Only connect the negative terminal connection lead (black) to the negative terminal of the battery. Only connect the positive terminal connection lead (red) to the positive terminal of the battery.
Page 17
Safety information − Remove leaked battery fl uid with a dry, absorbent cloth, avoiding contact with your skin, for example, by using acid- proof safety gloves. General information − Do not use the charger for charging and discharging non- rechargeable batteries. −...
Scope of delivery Scope of delivery DANGER! Choking and suffocation hazard Risk of choking and suffocation through swallowing or inhaling small parts or plastic wrap. − Keep the plastic packaging away from children. − Do not allow children to play with the packaging material. −...
Wall mounting Wall mounting The device has fi xing holes so that you can mount it on the wall. WARNING! Electric shock hazard! There is a risk of electric shock due to live parts in the device. − Always switch off the power point and pull out the plug before carrying out assembly and maintenance work or cleaning the device.
Operation Operation − Take the product out of the packaging and dispose of all the packaging material as well as the protective display fi lm. Connect the charger to the battery The charger detects the type of 6 V or 12 V battery automatically. WARNING! Electric shock hazard! There is a risk of electric shock due to live parts in the device.
Operation Select charging mode Select a charging mode depending on the type of battery and ambient temperature. You can also recharge a completely discharged (deeply discharged) battery (Page 25). After connecting the battery, the electronics in the charger start the charging process in 6 V or 12 V standard charging mode –...
Operation − Set this mode to charge 6 V batteries with a capacity less than 14 Ah. − Press the MODE button several times to select 6 V / 0.8 A. symbol appears on the display If you do not subsequently set a different mode, the electronics will automatically start the charging process at a charging current of approx.
Operation symbol appears on the display If you do not subsequently set a different mode, the electronics will automatically start the charging process at a charging current of approx. 3.8 A. When the battery is completely charged, the outline around the battery symbol stops fl...
Description of the charging cycle Regenerate / charge deeply discharged 12 V batteries (regeneration mode) − Connect the deeply discharged (completely fl at) battery to the charger and start a charging process. In this regeneration mode, the battery is charged until the charger measures a terminal voltage that is high enough for a regular charging process.
Page 26
Description of the charging cycle Charging mode Charging stage Battery voltage 12 V / 3.8 A Continuous charging At a battery voltage of 14.1 V to 14.8 V, charging is continued with a charging current of 3.0 A. At a battery voltage of 14.8 V to 15.1 V, charging is continued with a charging current of 0.8 A.
Reverse polarity protection Charging mode Charging stage Battery voltage Continuation of charging At a battery voltage of < 12.8 V, process charging is continued with a charging current of 0.8 A. Reverse polarity protection The device is protected against being set up incorrectly. If it is connected incorrectly or the battery voltage falls below 7.5 V for 12 V batteries and below 3.7 V for 6 V batteries, the device remains in standby mode.
Switching off Disconnect the battery from the charger in the following order: − After charging, disconnect the device from mains power. − Remove the negative terminal connection lead (black) from the negative terminal of the battery. − Remove the positive terminal connection lead (red) from the positive terminal of the battery.
Disposal Disposal PACKAGING The device has been packaged to protect it from damage during transport. The packaging is made of materials that can be recycled in an environmentally friendly manner. DEVICE All old devices labelled with the adjacent symbol must not be disposed of in normal household rubbish.
Cable length (power cord 1.80 m with plug) Lead length (charging lead 1.90 m with battery clamps) Operating temperature 0°C to 40°C Storage temperature –20°C to 60°C Declaration of Conformity MEDION AG herby declares that the product MD 19161 conform to all relevant Australian requirements.
• In our Service Community, you can meet other users, as well as our staff, and you can exchange your experiences and pass on your knowledge there. You will fi nd our Service Community at http://community.medion.com. • Alternatively, use our contact form at www.medion.com/contact.
Privacy statement Privacy statement Dear customer, We wish to inform you that we, MEDION AG, Am Zehnthof 77, 45307 Essen, Germany process your personal data as a data controller. For matters regarding data protection, we are supported by our company data protection offi...
These operating instructions are protected by copyright. Mechanical, electronic and any other forms of reproduction are prohibited without the written permission of the manufacturer. Copyright is owned by the company: MEDION AG Am Zehnthof 77 45307 Essen Germany Please note that you cannot use the address above for returns. Please always contact...
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. YEARS AFTER SALES SUPPORT WARRANTY 1300 884 987 www.medion.com.au...
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 884 987 or write to us at: MEDION Australia Pty Ltd Chatswood, NSW 2067; Australia Hotline: 1300 884 987 (Opening hours: Mon - Fri 08:30AM to 06:00PM EST) Internet www.medion.com.au;...
Page 37
Made in China AUTO XS is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES 1 SARGENTS ROAD MINCHINBURY NSW 2770 www.aldi.com.au VERSION: V2.4 AFTER SALES SUPPORT 99132 1 300 884 987 www.medion.com.au YEARS MODEL: WARRANTY 10/2019 MD 19161...
Need help?
Do you have a question about the AutoXS MD 19161 and is the answer not in the manual?
Questions and answers