Table of Contents
Advertisement
2-2. Switching Input Signals
When a monitor has multiple signal inputs, the signal to display on-screen can be changed.
Touch any switch and select
2-3. Switching the Display Mode (color mode)
This function allows easy selection of a display mode according to monitor application.
Touch any switch and select
●
Display Modes
Color Mode
Standard Mode
Advanced Mode
Note
• Use ColorNavigator 7 to set Advanced Mode (CAL1 to CAL3). These settings cannot be changed in the
Setting menu on the monitor.
• You can set the color mode for each input signal.
• You can disable specific color mode selections. For more information, see
to switch to the input terminal of the input you want to display.
to switch to the color mode you want to use.
Adjust color using the monitor's Setting menu.
You can also adjust the monitor's display using color management
software "ColorNavigator 7".
Custom
Select for configuring color settings according to your preference.
sRGB
Suitable for color matching with sRGB compatible peripherals.
Adjusts the monitor's display using the "ColorNavigator 7" color
management software.
CAL1
Displays the screen adjusted by ColorNavigator 7.
CAL2
CAL3
Purpose
"Mode Skip" (page
Chapter 2
Basic Adjustments/Settings
24).
13
Advertisement
Table of Contents
