Operating Your Breville Product - Breville Shake Creation MS400D Instruction Booklet

OPERATING yOUR BREvILLE PRODUCT

1. Place the Breville Shake Creation on a
dry, level surface. Plug the unit into a
230/240 volt power outlet.
2. Combine ingredients for milkshake or
fruit drink in milkshake cup. Do not fill
beyond the maximum fill line.
3. Insert the cup in the Shake Creation
ensuring the top of the cup is located
behind the top cup retainer. The base of
the cup should reset on the bottom cup
bracket.
4. Switch on at the power outlet.
5. Press the ON-OFF button to activate the
Shake Creation. When the milkshake
is combined fully, press the ON-OFF
button again to stop the unit.
6. Remove the milkshake cup and serve.
NOTE
No more than 1 minute is required
for making any drink. Operate for
no longer than 10 minutes total at
one time.
9