Advertisement
Bottom View
"AAA" (LR03)
Shown Actual Size
• Locate the battery compartment on the underside of
the elevator shaft.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Lift to open the battery
compartment door.
• Insert three, size "AAA" (LR03) alkaline batteries as
indicated inside the battery compartment.
Hint: We recommend the use of alkaline batteries for
longer battery life.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
Battery Installation
Battery
Compartment
Door
1.5V x 3
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, stan-
dard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the toy.
Battery leakage and corrosion can damage the toy.
Dispose of batteries properly.
• Do not dispose of batteries in a fire. The batteries may
explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as
recommended in the "Battery Installation" instructions
are to be used.
• If removable rechargeable batteries are used, they are
only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy
before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger
until it has been properly repaired.
6
Advertisement
