Advertisement
6. Attach Tx to pyjama or night dress
top. With Bed-Mat, place
Tx beside the bed or attach to
head board.
7. Once Tx detects wetness, it will
send a signal to the Rx.
Please allow up to 13 seconds for
the Rx to alarm. The nature of the alarm depends on your
selection. (Alarm, Music or recorded name/message). The Tx Red
LED and the Rx Green LED will flash once every second.
8. To stop the alarm sound, either remove the Tx sensor from
wetness, or press the Reset button on the Rx. If you do not
remove the Tx sensor from wetness, the Rx will alarm again
in 3 minutes.
9. Record the event time if you wish.
10. Setup the Tx sensor again as in 5 above.
11. To test the Tx/Rx, close the Easy-Clip leaver or place a moist
cloth across the Sensor or Bed-Mat tracks. The Rx should
always "Alarm" (allow up to 13 seconds for the Rx to alarm,
Battery saving feature).
12. The transmitter range is about 25 meters in open field.
13. The average battery life in the Tx is about 30 days and in the
Rx about 7 days (depending on the frequency and nature of
alarms).
14. Remove batteries if Tx/Rx not in use.
3
Advertisement
