Advertisement
11 of 18
Figure 21
Make sure the vinyl corner and bottom panel
seam lays flat on the mattress and is not
twisted.
Figure 22
Grasp each zipper end and pull around
corner post. Join zip ends to start the zip
closure.
Figure 23
Pull zip tab (equipped with long, nylon zip
pull) firmly to complete closure of each
corner.
Figure 24
Zip closure should finish below the vinyl-
coated padding (and above the hydraulic leg
on height adjustable beds) on each corner
post.
Pedicraft Inc. 4134 St. Augustine Rd. Jacksonville, FL 32207 Ph: 904-396-9627
Rev. 9 - 091919
Advertisement
