Pedicraft Canopy Enclosed Bed Operation Manual page 10

10 of 18
Figure 17
IMPORTANT: Remove wrapping from 2"
mattress , and place on Mattress Deck
before proceeding to next steps.
Cover floor area with drop cloths (provided).
Figure 18
Remove wrapping from zip-out mesh or
quilted bottom . Lay out zip-out bottom
panel on top of the 2" (4" if bed is equipped
with quilted bottom) mattress. If the bed is
equipped with head elevation, raise head
section to its highest position. If the bed is
equipped with knee elevation, raise knee
section to its highest position.
Figure 19
If the bed is equipped with Padded Head and
Foot Boards, tuck the bottom panel under
the head and foot boards.
Under the head end, wrap Velcro strips
around square tube and tuck under bottom
panel so that they adhere to the Velcro
attached to the bottom panel.
Figure 20
Grasp each corner zip and place each end on
opposite sides of the corner post of the bed.
Pedicraft Inc. 4134 St. Augustine Rd. Jacksonville, FL 32207 Ph: 904-396-9627
Rev. 9 - 091919