Pin Definition Power Connector; Switching Off; Optics; Mounting The Camera - Leuze electronic LCAM 408i User Manual

1.3

Pin definition Power connector

M12 A-Coded male
The camera needs 3,6 W for operation. The device can be powered in the range from 18 to 30 Volt
DC.
1.4

Switching off

The unit may be switched off anytime, since an overlay file system is used to store persistent data.
1.5

Optics

The lens (M12) is mounted behind a protective front glass (no optical requirements) that cannot be
changed be the user.
The setup the lens focus is done in the production, and cannot be changed by the user.
The field of view is
1.6

Mounting the camera

There are different options to mount the LCAM 408i

1.6.1 With screws

The camera can by mounted to a flat surface with four M4 * 4 screws.
There is no preferred mounting direction.
Pin Signal Name
1 +VIN
2
3 -VIN
4
1,80 x 1,40 m
2,50 x 1,90 m
3,40 x 2,60 m
Description
Supply Voltage,
positive terminal
not connected
Supply Voltage,
negative terminal
not connected
@ 1 Meter distance
@ 1,5 Meter distance
@ 2 Meter distance
6