INSTALLATION INSTRUCTIONS
R97009T
97009T
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. The highest working pressure for handshower is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer
is needed. The highest water and environment temperature is 60°C. Please keep handshower, shower head and
the shower arm away from heater, or it may become damaged and cause injury to the user.
ROUGH-IN DIMENSIONS
INSTALLATION
4
1260106-2A-C
Multifunction Handshower With Air-Geometric
Multifunction Handshower With Air-Geometric
G1/2˝
1
2
3
130
How to Install the Handshower
Flush both water supply for about one minute before the
handshower(1) is installed.
Put the screen washer(3) into the shower hose(4)
connector. Connect the handshower to shower hose.
NOTE: Don't over tighten.
Install check valve(2) into the handshower inlet if
needed.
Connect another end of shower hose to the water
supply.
RAINDUET
R97009T
97009T
1