Next steps
1. Install the
display
assembly.
2. Install the batteries.
3. Follow the procedure in
System fan
Removing the system fan
Prerequisites
1. Follow the procedure in
2. Remove the batteries.
3. Remove the
display
assembly.
4. Remove the heat-sink.
About this task
The figure indicates the location of the system fan and provides a visual representation of the removal procedure.
Steps
1. Unroute the cable from the routing guide on the system fan.
2. Disconnect the system fan cable from the connector on the system board.
28
Removing and installing components
after working inside your
tablet.
before working inside your
tablet.