Table of Contents
Advertisement
4: Connecting to uSee from a browser
To access and control the uSee unit, connect using a web browser on an external device, such as a laptop or tablet PC.
You can connect either via:
- a direct wired Ethernet network connection or
- a wireless LAN connection (802.11b/g)
4.1: Connecting to a direct wired Ethernet network (optional)
1.
Plug the Ethernet cable from the local computer network in to 'LAN Port 2' on the uSee unit.
2.
Push the cable into the rubber grommet as it exits the enclosure.
3.
Leave sufficient clearance around the uSee unit to give enough space to ensure the cables are not crushed or bent
in a manner that may affect their performance.
To Local
Computer Network
7
Helvar uSee Installation and Set-Up Guide
Rubber
grommet
LAN
port 2
Advertisement
Table of Contents
