3: Connection to Lighting Network
3.1: Connect the Helvar 'Lighting Router' network
1.
Plug the Ethernet cable from the Helvar 'Lighting Router' network into 'Port 1' on the uSee unit
2.
Push the cable into the rubber grommet as it exits the enclosure
3.
Leave sufficient clearance around the uSee unit to give enough space to ensure the cables are not crushed or bent
in a manner that may affect their performance.
To Helvar Lighting
Network Router
Helvar uSee Installation and Set-Up Guide
Rubber
grommet
LAN
port 1
6