Table of Contents
Advertisement
Introduction
The Helvar uSee Web Browser User Interface is a hardware and software platform that when used in conjunction with a Helvar
Router system, allows the user to view the system, select scenes, programme new scene levels, apply alternate scene and
group names, and monitor energy use.
The uSee interface provides both wired and wireless connectivity to all popular web browsing devices, such as an iPad, and
provides an easy to use, intuitive graphical means of control of the lighting system.
1: Mount to wall
Mounting, Environmental and Clearance Requirements
Mounting
•
Mount the unit on a flat surface.
•
Use No.8 or No. 10 screws with a head diameter between 6 mm and 9 mm.
•
Use wall plugs if necessary.
•
Refer to the 'Mounting Dimensions' diagram on the next page.
Environment
•
The ambient temperature must be between 0ºC and 40ºC.
•
Air humidity must be between 0% and 90% (non-condensing).
•
The area must be adequately ventilated.
•
Do NOT install this product in a damp location.
Clearance
•
Leave sufficient clearance (at least 100 mm) to allow cables to be connected.
2
Helvar uSee Installation and Set-Up Guide
Advertisement
Table of Contents
