Advertisement
7.3.
Hydraulic circuit (fig.9)
7.3.1. Connect the cylinder tubing (1) to the delivery tube and connect the "back to tank" tube (2) to the recovery tube.
7.3.2. With mains air 'ON' (see the pneumatic circuit fig.8 and fig.5), raise and lower a few times to remove air from the hydraulic circuit. For
lowering, a load will be required to exhaust the oil "back to tank".
2
B
A
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
IMpORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
R
1
Q
L
E
A
M
n
F
d
c
Reference
description
A
Tank
B
Pressure relief valve 250bar (29,000 kPa)
C
Oil filter
d
Pump valve
E
Silencer
F
Pump
G
3 port 2 position vavle
H
Air filter
I
Air line adaptor
L
Control valve (lower lift)
M
delivery v alve
N
Control valve (elevate lift)
O
Air actuated hydraulic pump assembly
P
Pawl lift pneumatic cylinders
Q
"Parachute" valve (tube rupture)
R
Hydraulic cylinder (ram)
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
fig.9
G
P
I
H
O
Environmental protection
Original Language Version
Hydraulic cylinder
fig.10
2
"Return
to tank"
1
Supply
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
AVR2500A
R
Issue: 1 - 07/11/14
Advertisement
